PVC imitation marble plate production line has the following characteristics:
PVC imitation marble board is a board composed of extruded board and marble decorative film. Because the material of the board and the film is the same, it is integrated after hot compress by three roller calender, which ensures that the surface of the board is smooth, beautiful, non-toxic, free of mildew, deformation, cracking, good durability and flexible deformation. It is a new decorative material.
PVC imitation marble board is a new decorative material, green and environment-friendly. The material does not contain formaldehyde. It has smooth appearance, beautiful surface, elegant color and comfortable hand feeling; Paint free, non-toxic, mould proof, moisture-proof, flame-retardant, no volatile smell, good surface hardness, impact resistance, sound insulation, shock resistance, no shrinkage and cracking, good durability, curvilinear forming, with the characteristics of self extinguishing from fire, washing resistance, wear resistance, acid and alkali resistance, no dust adhesion, no mildew, etc., exquisite design and production, reasonable shape and color matching, convenient construction, good sawing and cutting, not easy to crack, and paint free lines are used for trimming, Adhesive bonding does not need to worry about mending ash after nailing, and there is no need for paint. It can save the labor and paint cost of paint after construction, and avoid the unhealthy smell and carcinogens of paint on human body. It not only saves a large amount of long-term maintenance and nursing cost, but also shortens the construction period. It has elegant effect and low cost. It is a new generation of paint free decorative material with green environmental protection, non-toxic, tasteless and pollution-free, The production line can also produce single-layer and multi-layer soft and hard PVC board (sheet) and PVC wide floor leather.
The installed capacity of PVC imitation marble slab production line is 95kw / sjsz-65 line and 125KW / SJSZ-80 line, and the actual power consumption is about 60% - 70% of the total installed capacity. However, it should be noted that when the moisture content of the wood surface is greatly different from that of the center, the machining allowance should be reserved for the machining of holes and tenons.